Yamaha RXV6A AV Receiver with Bowers & Wilkins MT-50 Home Theatre System

Yamaha RXV6A Dolby Atmos 7.2ch 8K AV Receiver

Get more from your entertainment with crystal clear images and immersive sound. The V6A makes every moment feel real.

Dolby Atmos and DTS:X for three-dimensional sound

Dolby Atmos and DTS:X use ceiling or up-firing speakers for three-dimensional and fully immersive sound. Whether it’s rain falling in a tropical jungle or the intense sound of overhead gunfire, Dolby Atmos and DTS:X put you in the centre of the action. DTS Neural:X offers an even more immersive sound, with a heightened sense of realism.

Dolby Atmos Height Virtualization for extra height, without the speakers*

For those without in-ceiling or upward firing speakers in their system, Dolby Atmos with Height Virtualization Technology simulates the Atmos experience with forward facing-drivers. Configure up to five speakers to replicate the effect of two in-ceiling speakers, or utilize all seven channels to simulate the powerful effect of four overhead speakers. *This function is available via firmware update.

Compatible with the next generation of high resolution – 8K*

HDR10+ signals not only dynamic of video content on a scene-byscene basis, it also provides, in a small amount of metadata, the scene characteristics between bright and dark so that important detail can remain. And supports end-to-end 8K/4K resolutions and higher refresh rate solutions with a single upgraded cable for seamless integration within the HDMI eco-system. 4K/120Hz enables ultrafast motion UHD images to be crisp and razor sharp; allowing sports, action movies, high-performance.

Supports Dolby Vision and HDR10+*

Using a 7/1 (in/out) HDMI interface, the RX-V6A supports your full system. It also supports a wide range of High Dynamic Range video formats. These include Dolby Vision, HDR10 and HLG. It also supports HDR10+, which enhances picture realism by sending dynamic Meta data to your TV. *via firmware update.

Game on*

Enhanced gaming and media features ensure an added level of smooth and seamless motion and transitions for gaming, movies and video. They include: Auto Low Latency Mode (ALLM) enables the ideal latency setting to automatically be set allowing for smooth, lagfree and uninterrupted viewing and interactivity. Variable Refresh Rate (VRR) reduces lag, stutter and frame tearing for more fluid and detailed gameplay.

Powerful precision

For precise, dynamic sound, the Yamaha RX-V6A uses a powerful, 100 watts, high slew rate amplifier. Ideal for HiRes music and home cinema, the amp powers your music or soundtracks with gusto – keeping you on the edge of your seat during action movies or gaming, and totally bewitched by your favourite music. This design of amplifier can be tricky to optimise, but Yamaha’s unique design achieves dynamic scale while also maintaining a stable signal transmission.

Surround sound, untied

For an easy way to reduce cabling, the RX-V6A offers the option of wireless rear speakers. Combine this receiver with the Yamaha MusicCast 20 or MusicCast 50 speakers and you can leave aside speaker cable connections. Perfect if you have a solid floor and struggle to hide speaker cable or if you simply want a cleaner style, wireless surround speakers cut down on the clutter.

Connect more – including a turntable

As well as seven HDMI inputs, this Yamaha AVR also has a wide range of other AV connectivity. Optical coaxial digital inputs are ideal for connecting older devices or upgrading the sound from a compatible CD/Network player. Three analogue inputs are perfect for Hi-Fi components, with the dedicated MM phono input perfect for plugging in a turntable. The Zone 2 output gives you the option of adding a second pair of speakers in another room.

MusicCast for music all around your home

The Yamaha RX-V6A is part of Yamaha's hugely impressive network audio system, MusicCast. With MusicCast you control all your compatible Yamaha MusicCast products via your smartphone or even Amazon Alexa or Google Assistant by voice*. Play the same music on all the components or split the sound into different zones for different moods in each room; the choice is yours. The MusicCast CONTROLLER app lets you operate the system around your home and change settings quickly and easily. *requires third party Alexa or Google device.

Stream the best music services

Compatible with Amazon Music, Spotify Premium, Pandora, Napster, Tidal, Deezer and Qobuz, the RXV6A is fully equipped for your favourite music streaming service. With Tidal and Qobuz already offering higher resolution playback, it’s now possible to find a streaming service that at least matches the quality of CD and, in some cases, even improves upon it.

Advanced networking including Apple AirPlay and Bluetooth

As well as MusicCast, the RX-V6A is also compatible with Apple AirPlay 2, letting you stream music from your Apple iPod Touch, iPhone, iPad or other compatible Apple device, wirelessly, around your home. Just ask Siri where you want the music to play. For a quick and easy connection with your smartphone, use the Bluetooth connection for easy music streaming.

Specifications

Amplifier Section 
Channel 7.2
Rated Output Power (1kHz, 1ch driven) 150W (4 ohms, 0.9% THD)
Rated Output Power (20Hz-20kHz, 2ch driven) 100 W (8 ohms, 0.06% THD)
Maximum Effective Output Power (1kHz, 1ch driven) (JEITA)
160W (6 ohms, 10% THD)
High Slew Rate Amplifier Yes

General 
Standby Power Consumption (IR only) 0.1W
Auto Power Standby Yes
ECO mode Yes
Dimensions (W x H x D) 435W x 171H x 377D mm (with antenna up:435W x 245H x 377D mm);17-1/8”W x 6-3/4”H x 14-7/8”D (with antenna up:17-1/8”W x 9-5/8”H x 14-7/8”D)
Weight 9.8kg 21.6lbs

Connectivity 
MusicCast Surround Yes
HDMI Input/Output 7 / 1
HDMI 8K/60Hz support 3 / 1
HDMI CEC Yes
USB Input Yes
Network Port Yes
Wi-Fi Yes (2.4 / 5 GHz)
AirPlay2 Yes
Bluetooth Yes (SBC / AAC)
Front Input USB
Digital Audio Input/Output: Optical 1 / 0
Digital Audio Input/Output: Coaxial 1 / 0
Analog Audio Input/Output 4 / 0
Phono Input Yes
XLR Terminal N/A
Component Video Input/Output N/A
Composite Video Input/Output N/A
Preout 2.2-ch
Headphone Output 1

Bowers & Wilkins MT-50 Home Theatre System

With going with Ultra HD and want sound to match, bringing together the sleek M-1  speakers and compact but powerful ASW608 that ensures that Bowers & Wilkins expertise will make your movies magic within any room.

Sleek, Versatile Satellites

With the little M-1 Speakers they will fit almost anywhere in even the smallest room, you can also wall-mount them

Hideaway Subwoofer

The MT-50’s ASW608 Subwoofer may have room shaking punch, but it’s small enough to hide away anywhere

Made to Match

Every Element of the system, from the M-1 Speakers to the subwoofer, has been designed to combine to thrilling effect.

Small Speakers – Big Sound

Combining Clean, Crisp M-1 Speakers with powerful weighty ASW608 Subwoofer guarantees an immersive, thrilling cinema experience.

Designed to be discreet

Every Element of the MT-50 is aimed at making it easy on the eye, from the choice of white or black finishes to the clever way the cables are hidden away in the structure of the speakers and their stands.

Nautilus Inside

The same Nautilus tapered tube technology you'll find in our flagship speakers is also used in the MT-50's little M-1 speakers, guaranteeing precision and clarity for all that dialogue and sound effects.

Built to shake the room

Compact it may be, but the ASSW608 subwoofer used in the MT-50 system packs a mighty punch, thanks to an advanaced composite driver and serious powerful amplifier.

Specifications

Technical feature

Nautilus™ tube loaded tweeter with aluminium dome Woven glass fibre cone bass / midrange

Description

2-way vented-box system

Drive Units

1x 25mm (1in) aluminium dome high-frequency

1x 100mm (4in) woven glass fibre cone bass / midrange

Frequency range

-6dB at 55Hz and 50kHz

Frequency response

64Hz - 23kHz ±3dB on reference axis

Dispersion

Within 2dB of reference response

Horizontal: over 60º arc

Vertical: over 10º arc

Sensitivity

85dB spl (2.83V, 1m)

Harmonic distortion

2nd and 3rd harmonics (90dB, 1m)

<1% 120Hz - 30kHz

Nominal impedance

8Ω (minimum 4.0Ω)

Crossover frequency

4kHz

Recommended amplifier power

20W - 100W into 8Ω on unclipped programme

Max. recommended cable impedance

0.1 Ω

Dimension

Height: 248mm (9.8in)

Width: 114mm (4.5in)

Depth: 162mm (6.4in)

Mounted on table stand

Net weight

2.3kg (5lb)

Finishes

Cabinet: Matte Black or Matte White

Grille: Matte Black or Matte White perforated steel to match

ASW608 Specs  

Description

Active closed-box subwoofer system

Drive unit

ø200mm (8 in) paper/Kevlar® cone long-throw

Frequency range

-6dB at 23Hz and 25/140Hz adjustable (EQ at A)

Frequency response

±3dB 32Hz – 40/140Hz adjustable (EQ at A)

Bass Extension

-6dB at 23Hz (position A)         

-6dB at 28Hz (position B)          

-6dB at 36Hz (position C)

Amplifier

Power output: 200W

Rated power consumption:

40W/ 0.5W standby

Input impedance:

33kW

Signal / noise:

>90dB

Functions:

Volume level – line in

Volume level – speaker in         

Low-pass filter frequency – line in only          

Low-pass filter bypass

Bass extension 

Bass roll-off alignment  

Auto sense on/standby

Phase switch

Inputs:

Line In (RCA Phono)       

Speaker in (Binding post)            

12v trigger (3.5mm jack)              

Low-pass filter

Active 4th-order, variable cut-off frequency

Dimensions

Height: 260mm (10.2 in) not including feet          

Width: 260mm (10.2 in)

Depth: 330mm (13 in) including grille and controls

Net weight 8.85kg (19.5 lb)