Monitor Audio Radius 390 Subwoofer, combining the colour coded 10 inch C-CAM active/ABR drivers, powered by 200 W Class D amplifier. With rapid EQ optimisation from Impact, Music and Movie settings, and system automation via the 12 V trigger.
C-CAM bass driver – radius features bass drivers introduced by top of the range platinum speakers and applied subsequently to Gold GX. The radiating diaphragm and its motor design, introduce larger motor sizes and voice coils for increased excursion. With higher power capability and reduced distortion.
The compact Radius cabinets, benefit from efficient rear-venting design. Releasing air trapped and compressed air at the back of the tweeter dome. With guiding around the drive assembly to a rear loading chamber.
With HiVe’s reflex port making Radius debut, it’s shaped to have the same effect on airflow as a gun-barrel on a bullet.
With HiVe II port design, rifled grooves inside the port help to accelerate the flow and reduce turbulence, so air moves in and out of the port more efficiently for faster dynamic bass response.
With a Single through Bolt Driver, it provides mechanical de coupling and enhanced mid band clarity with resolution.
Audio speaker mount or any standard wall bracket
Optional floor stand with internal cable management system
System Format Active sub-woofer system – Auxiliary (ABR) loading. 18 mm MDF cabinet
Lower Frequency Limit 30 Hz (- 6 dB)
Upper Frequency Limit Variable 40 – 120 Hz @ 24 dB/Octave
Amplifier Output 200 Watts @ 1% THD+N
Amplifier Classification Class D amplifier with Switch mode power supply (SMPSU)
Bass EQ Profiles Music / Movie / Impact
Phase Control 0 & 180 degrees
Auto Sensing Line Level >3.5mV
Input Level Requirements Standby after approximately 15 minutes if no signal sensed
Drive Unit Complement 1 x 10" (250 mm) C-CAM long throw driver 1 x 10" (250 mm) ABR
Input Impedance > 20 ohms
Mains Input Voltage AC 110 - 120 V ~ 50/60Hz; AC 220 - 240 V ~ 50/60Hz (Factory Region Preset)
Dimensions (Including Amp and Feet (H x W x D)) 348 x 330 x 345 mm (1311/16 x 13 x 129/16")
Connection Stereo RCA in, LFE in, 12v Trigger in (3.5 mm mono mini-jack)
Trigger Input 5 - 12v via 3.5mm mono mini-jack socket
Power Consumption 200 Watts / 0.5 Watts in Standby (ErP approved)
Weight (unpacked) 13.76 kg (30 lb 4 oz)
Add products and discover special offers and discounts.