This Speaker Package includes
2 Bronze 5 Floorstanding Speakers
1 Bronze Centre Speaker
1 Bronze W10 Speaker
2 Bronze FX Speakers
Monitor Audio Bronze 5 Floorstanding Speakers, these slender speakers bring powerful bass to your home cinema or home theatre environment, with the stealthy appearance and it surpasses those of larger towers.
Bronze 5’s low distortion architecture combines the high frequencies and clean expressive mid with room filling bass, making sure to deliver rhythmic and addictive blend of large scale dynamics and detail from unobtrusive tower.
The C-CAM Bass driver of 5.5 inches and the C-CAM bass/mid driver arrange a two and a half way system configuration. It operates by giving a separate acoustic chamber with front and rear firing HiVe II ports to provide differential tuning for higher efficiency and greater low frequency extension.
Features
Gold Dome Tweeter C-CAM
Twin 5.5 Inches C-CAM bass and mid-range drivers
Port Technology HiVe II
Cross Bracing techniques for high rigidity with 18 mm MDF construction throughout
Outer panel for easy termination and neat cable access.
Premium quality finish
Specifications
System Format
2-1/2 Way
Frequency Response
37 Hz — 30 kHz
Sensitivity (1W@1M)
90 dB
Nominal Impedance
8 ohms
Maximum SPL
113.8 dBA (pair)
Power Handling (RMS)
120 W
Recommended Amplifier Requirements
30 — 120 W
Cabinet Design
Dual chamber bass reflex – Ported front and rear HiVe II Port technology
Crossover Frequency
LF: -6 dB @ 600 Hz
MF/HF: 2.8 kHz
Drive Unit Complement
1 x 51/2" C-CAM bass
1 x 51/2" C-CAM bass mid-range driver
1 x 25 mm C-CAM Gold Dome tweeter
Cabinet Dimensions (H x W x D)
850 x 165 x 248 mm (337/16 x 61/2 x 93/4")
Dimensions (Including Grille, Terminals, Plinths and Spikes (H x W x D))
898 x 215 x 282 mm (355/8 x 87/16 x 111/8")
Weight (each)
11 kg (24 lb 6 oz)
Bronze FX, develop the perfect mix of reverberant or direct surround sound with this Bronze Home Cinema System, with this wall hugging speaker. The Bronze FX can combine seamlessly with front channels to establish the immersive audio experience essential to successful home theatre design.
With the LCR counterparts, its angled-baffle cabinet, can be mounted onto the side or rear walls. With it having a dispersion characteristics change with a flick of a switch to accommodate the precise requirements for di-pole or bi-pole operation.
A single 5.5 inch C-CAM bass/mid driver, dual C-CAM Gold Dome tweeters mounted on angled side-panels, helping to create a wider, more enveloping
Features
Bringing excellent imaging and timbre consistency in surround applications
C-CAM Gold Dome Tweeter
5.5 Bass/midrange driver with concave dished C-CAM cone
Di-pole or bi-pole operation by the simple flick of a switch
Bracing and rigidity increased overall
High-quality crossovers with premium grade polypropylene film capacitors
Premium quality vinyl veneer finish
Specification
System Format
2-Way
Frequency Response
65 Hz — 30 kHz
Sensitivity (1W@1M)
88 dB
Nominal Impedance
8 ohms
Maximum SPL
110 dBA (pair)
Power Handling (RMS)
80 W
Recommended Amplifier Requirements
20 — 80 W
Cabinet Design
Sealed Cabinet
Drive Unit Complement
1 x 51/2" C-CAM bass mid-range driver.
2 x 25 mm C-CAM Gold Dome tweeter
Crossover Frequency
2.8 kHz
Cabinet Dimensions (H x W x D)
274 x 276 x 105 mm (1013/16 x 107/8 x 41/8")
Dimensions (Including Grille and Bracket (H x W x D))
274 x 281 x 118 mm (1013/16 x 111/6 x 45/8")
Weight (each)
3.2 kg (7 lbs)
Bronze Centre Speaker, share ther acoustic and aesthetic design of the compact Bronze Centre. Bringing in the natural partner for Bronze left/right speakers in a home theatre array.
With it featuring Twin 5.5 inch C-CAM mid-range/bass drivers, bringing a C-CAM tweeter to pin-point synergy producing front soundstage action and articulate dialogue.
Features:
Dual 5.5 Inch Bass/midrange drivers
C-CAM Cone Profile
Single Bolt-through driver systems, increased overall bracing, rigidity and driver/baffle de-coupling
Magnetic grille fixing
Quality vinyl finish
radial and cross-bracing techniques for high rigidity resulting in low cabinet coloration with 18mm MDF Construction throughout
Specification
System Format
2-Way
Frequency Response
60 Hz — 30 kHz
Nominal Impedance
8 ohms
Maximum SPL
113 dBA
Power Handling (RMS)
120 W
Recommended Amplifier Requirements
20 — 120 W
Cabinet Design
Sealed Cabinet
Drive Unit Complement
2 x 51/2" C-CAM bass mid-range driver.
1 x 25 mm C-CAM Gold Dome tweeter
Crossover Frequency
3.0 kHz
Cabinet Dimensions (H x W x D)
165 x 460 x 165 mm (61/2 x 181/8 x 61/2")
Dimensions (Including Grille and Terminals (H x W x D))
165 x 460 x 193 mm (61/2 x 181/8 x 75/8")
Weight (each)
5.6 kg (12 lb 6 oz)
Bronze W10, bringing low distortion design with a concentrated bass domain. With this Bronze bass, it is deeply provisioned and authentically proportioned.It has been re-tooled from the ground up to punctuate the sound of every Bronze system with stunningly natural bass transients, timed to perfection.
Featuring the trinity of amplifier topology, long throw driver design and powerful DSP processing. Switch mode power conversion techniques, power reservoir combine to generate enormous dynamic headroom and custom DSP tuning. Drop low and punch hard with the driver without distortion for a deep bass experience.
The 10 inches Auxiliary Bass Radiator ensures that the same compact footprint as its predecessor, the W10 delivers an incredible 6 dB greater SPL at 40 Hz. With the pre-set EQ settings for music, movie impact enjoys the bass energy from the W10’s.
Features
Long Throw 10 inch driver featuring concave C-CAM cone
10 inch flat panel auxiliary bass driver mounted on the bottom to augment power handling and low frequency extension.
Class-D amplifier over 200 W with low distortion
Switch power supply, deliver the high continuous rating and provides the instantaneous delivery of high current.
Three pre-set EQ mode settings, impact, movie, music
Twelve volt trigger provides switching control from AV amp, processor or home automation control system.
18 mm thick MDF construction
Premium quality vinyl finish
Multibuy Savings
If you're looking for a Multibuy savings deal on 2 or more items, we can workout a deal on our already competitive prices.
Simply click the Multibuy Saving button on any product page to build up your list of required products. Once you have built your list, please confirm your required quantities, complete your details and click the "Request Quote" button.
We will contact you by telephone or email within 24 hours to advise you of our best price.
Add products and discover special offers and discounts.
- We deliver seven days a week
- Standard deliveries are despatched via specialist carriers and are normally delivered within 3-5 working days.
- Express deliveries are dispatched same day (if ordered before 14:30) for delivery within 1-2 working days.
- For weekend deliveries, orders need to be placed by 14:30 on Friday.
- Larger Items are despatched using our team of specialist nationwide carriers. You will be contacted within 48 hours verifying your order and an estimated delivery date.
- Deliveries direct from manufacturers or suppliers can take a little longer but we will keep you informed and updated.
.png)
.png)
