Overview:
The Denon PMA800NE, features digital inputs and a built-in phono equalizer that reaches new heights to give off high quality audio performance. With the PMA800NE providing sound quality that balances delicate musical details together, with its various components with a D/A 192kHz/24 Converter and using 85W per channel the device supplies enough power to drive out your speaker for the most optimised sound.

Features:
Get the most performance to drive your favourite loudspeakers. Wide Bandwidth captures everything from deep bass to detailed highs.
Support all digital music sources.
Built-in D/A Converter 192kHz/24bit. High-resolution audio playback
HiFi parts. Enjoy the exceptional sound. 
Vibration resistant design, unaffected by the environment and listen to clear details and quality
Speaker Switchable A/B, connect two pairs of speakers to enjoy music in various rooms
Stop mode with Micro-processor, protects audio signal and external noise from playback
MM and MC phono equalizer amp
Compatible with Turntables, to enjoy vinyl tracks

Analog Mode
With the included Analog Mode, you can close the power to the digital power source, avoid any frequency influence on the analogue section of the PMA800NE. Enjoy them with clarity and reproduction. With the operation of the purely analogue amp, coaxial and optical digital inputs are disabled when you listen to the analogue source.

MM and MC Phono Equalizer
With the MM and MC cartridges, the phono equalizer is supported. With the Input having high gain, it means that there are no adverse effects on the sound quality, improving the sound.

Vibration-resistant Design for Pristine Sound
With the design, it has been created to be vibration resistant reducing any audio effects on heavy components. The transformer is the largest vibration source among the amplifier components. Fitted with a 1.6 mm thick steel plate at the mount it suppresses any vibration that is created by the transformer. Resulting in pristine sound.

Micro-processor Stop Mode
The featured Stop mode ceases all the operations of the microprocessor, when not needed for playback. By stopping the processor clock during the listening, the audio signal is protected from external noise enhancing the sound quality.  

Specifications

Features

Channels: 2

Digital in: USB-B / optical / coaxial / USB-A: - / 3 / 1 / -

Sample Rate digital In: 192 kHz / 24-bit

DAC chip: PCM5141

Analog Mode: Yes

Advanced HC-TR single push pull circuit: Yes

Wide range amplifier: Yes

High current dynamic power supply: Yes

Power amp discrete construction: Yes

Micro processor auto off: Yes

Balance / Bass / Treble / Loudness: Yes / Yes / Yes / -

Others

Shottky diodes: Yes

Solid Heat Sinks: Yes

Source Direct: Yes

Inputs/Outputs

Audio Inputs: 5

Digital in: USB-B / optical / coaxial / USB-A: - / 3 / 1 / -

Phono Input: MM / MC: Yes / Yes

Audio Outputs: 1

Pre-out / Main-in: - / -

Gold plated Cinch: 

Speaker A / B: Yes

Number of terminals: 4

Remote Control Bus in / out: Yes

HEOS Link compatibility: IR / IP: Yes / -

Headphone Out: Yes

Specifications

Output power 8 Ohm (20 Hz - 20 kHz, T.H.D. 0.07%): 50 W

Output power 4 Ohm (1 kHz, T.H.D. 0.7%): 85 W

Total Harmonic Distortion: 0.01 %

Input Sensitivity: MM: 2.5 mV / 47 kohm

Input Sensitivity: MC: 200 µV / 100 ohm

Signal to Noise Ratio: MM/MC: 86 dB / 71 dB

Input Sensitivity: High level: 105 mV / 40 kohms

Signal to Noise Ratio: High level: 105 dB

Treble Control: ± 8 dB at 10 kHz

Bass Control: ± 8 dB at 100 Hz

General

Metal Front Panel: Yes

Power Consumption in W: 200

Standby Consumption in W: 0.3

Auto Power Off: Yes

Remote Control: RC-1223

System Remote Function: Yes

Maximum Dimensions (W x D x H) in mm: 434 x 307 x 122

Weight in kg: 7.5