With the Denon DCD800NE CD Player, you can listen your favourite songs with accurate reproduction, remain faithful to the original with technologies such as the Advanced AL32 Processing Plus. With CD/CD-R/RW or music player, play your music by connecting it to the device to enjoy WAV, FLAC and DSD files with pure audio signal.
Ultra Precision and Advanced AL32 Processing Plus
Disc Support for modern high resolution audio, using formats such as MP3 or WMA
High Quality from High Resolution Audio files for your listening experience.
DSD 2.8 MHz/5.6 MHz via USB-A Port which is supported
DAC Master Clock, to ensure audio reproduction that is jitter-free
Original sound that is faithfully reproduced
Direct Mode, using clean output for detailed accurate sound
Advanced Denon AL32 processing for quality sound
The DCD800NE using AL32 processing, brings a unique sound that gets closer to the true 24 bit of audio. With a high accuracy master clock, it is used to improve the musical timing and realism, to give what the artist intended.
USB input with support for High Resolution
With the USB Port at the front of the DCD800NE, it brings a wide range of audio file support. With the support for High Resolution music files that are up to 24 bit, the DSD5.6 has the ability to become a ideal playback device for music files.
Superior build quality
With the design of the DCD800NE, it provides a virbration resistance that keeps distortion and vibrations to a minimum.
With the RCA Analogue phono output, the DCD800NE features coaxial and optical outputs, this means that this device can connect to a range of digital amps, AV receivers and digital recording devices.
The Denon PMA800NE, features digital inputs and a built-in phono equalizer that reaches new heights to give off high quality audio performance. With the PMA800NE providing sound quality that balances delicate musical details together, with its various components with a D/A 192kHz/24 Converter and using 85W per channel the device supplies enough power to drive out your speaker for the most optimised sound.
Get the most performance to drive your favourite loudspeakers. Wide Bandwidth captures everything from deep bass to detailed highs.
Support all digital music sources.
Built-in D/A Converter 192kHz/24bit. High-resolution audio playback
HiFi parts. Enjoy the exceptional sound.
Vibration resistant design, unaffected by the environment and listen to clear details and quality
Speaker Switchable A/B, connect two pairs of speakers to enjoy music in various rooms
Stop mode with Micro-processor, protects audio signal and external noise from playback
MM and MC phono equalizer amp
Compatible with Turntables, to enjoy vinyl tracks
With the included Analog Mode, you can close the power to the digital power source, avoid any frequency influence on the analogue section of the PMA800NE. Enjoy them with clarity and reproduction. With the operation of the purely analogue amp, coaxial and optical digital inputs are disabled when you listen to the analogue source.
MM and MC Phono Equalizer
With the MM and MC cartridges, the phono equalizer is supported. With the Input having high gain, it means that there are no adverse effects on the sound quality, improving the sound.
Vibration-resistant Design for Pristine Sound
With the design, it has been created to be vibration resistant reducing any audio effects on heavy components. The transformer is the largest vibration source among the amplifier components. Fitted with a 1.6 mm thick steel plate at the mount it suppresses any vibration that is created by the transformer. Resulting in pristine sound.
Micro-processor Stop Mode
The featured Stop mode ceases all the operations of the microprocessor, when not needed for playback. By stopping the processor clock during the listening, the audio signal is protected from external noise enhancing the sound quality.
Digital in: USB-B / optical / coaxial / USB-A: - / 3 / 1 / -
Sample Rate digital In: 192 kHz / 24-bit
DAC chip: PCM5141
Analog Mode: Yes
Advanced HC-TR single push pull circuit: Yes
Wide range amplifier: Yes
High current dynamic power supply: Yes
Power amp discrete construction: Yes
Micro processor auto off: Yes
Balance / Bass / Treble / Loudness: Yes / Yes / Yes / -
Shottky diodes: Yes
Solid Heat Sinks: Yes
Source Direct: Yes
Audio Inputs: 5
Digital in: USB-B / optical / coaxial / USB-A: - / 3 / 1 / -
Phono Input: MM / MC: Yes / Yes
Audio Outputs: 1
Pre-out / Main-in: - / -
Gold plated Cinch:
Speaker A / B: Yes
Number of terminals: 4
Remote Control Bus in / out: Yes
HEOS Link compatibility: IR / IP: Yes / -
Headphone Out: Yes
Output power 8 Ohm (20 Hz - 20 kHz, T.H.D. 0.07%): 50 W
Output power 4 Ohm (1 kHz, T.H.D. 0.7%): 85 W
Total Harmonic Distortion: 0.01 %
Input Sensitivity: MM: 2.5 mV / 47 kohm
Input Sensitivity: MC: 200 µV / 100 ohm
Signal to Noise Ratio: MM/MC: 86 dB / 71 dB
Input Sensitivity: High level: 105 mV / 40 kohms
Signal to Noise Ratio: High level: 105 dB
Treble Control: ± 8 dB at 10 kHz
Bass Control: ± 8 dB at 100 Hz
Metal Front Panel: Yes
Power Consumption in W: 200
Standby Consumption in W: 0.3
Auto Power Off: Yes
Remote Control: RC-1223
System Remote Function: Yes
Maximum Dimensions (W x D x H) in mm: 434 x 307 x 122
Weight in kg: 7.5
"These QX2s are one of the most enjoyable pairs of speakers you can buy for under £500" - What HiFi? 5 Star Award
The Mission QX1 Bookshelf Speakers, these come in two way designs combining the new 38mm Mission Dome Tweeter with the Bass Driver. Bringing overall style and sound to your music you prefer.
The Design Concept
With the QX Series, it was designed to bring attractive and unique design together, to bring speakers that fit perfectly into the modern home.
New “Ring Dome” Treble Unit
Bringing high levels of musical detail with low distortion together. The Treble unit lowers the distortion that completely avoids the usual dome cavitation effects.
With the design, and the rear cavity that has a non-reflecting design. It is vented to the back to reduce the resonance and maintaining the operating bandwidth.
Natural midrange quality, the bass impact that is provided by the cuvilnear cone gives clarity and lucidity towards the sounds that are created.
General description: 2-way bookshelf Speaker
Enclosure type: bass reflex
Transducer complement: 2-way
Bass drive: 6.5"(150mm) Long Fiber Composite Cone
Treble driver: 1.5" (38mm) Textile Ring Dome
AV Shield: No
Sensitivity (2.0V @ 1m): 88dB
Recommended amplifer power: 25-100W
Peak SPL: 95dB
Nominal impedance: 8Ω Compatible
Minimum impedance: 3.9Ω
Frequency response(+/-3dB): 44Hz - 24kHz
Bass extension(-6dB): 38
Crossover frequency: 2.2kHz
Cabinet Volume (in litres): 13.5L
Height (on plinth): 320mm
Depth (with terminals): (300+5)mm
Carton size: 5680*410*430mm
- Core thickness: 2 x 1.25mm2
- Composition of care: 79 x 0.2mm
- Core type: Copper
Add products and discover special offers and discounts.