Audio Technica ATLPW30TK, this fully manual belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The 33-1/3 and 45 RPM turntable features an aesthetically pleasing anti-resonance MDF with simulated teak veneer to limit low frequency acoustical feedback.
The Turntable includes a straight aluminium tonearm with adjustable tracking force and an AT-HS4 universal ½” mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge.
Audio Technica has expertise that shows they have been a leader in phono cartridge design in the versatile. High performance AT- VM95C cartridge. Which comes with a 0.6 mil conical stylus. But is compatible with a VM95 Series replacement stylus. Offering a wide choice of options for every budget and application.
Equipped with a built-in selectable phono preamp and detachable dual RCA output cable to make direct connection to components with or without a dedicated phono input.
Belt-drive operation with two speeds: 33-1/3 and 45 RPM, Full Manual
Fully Manual operation
Adjustable anti-skate control
Die-cast aluminium platter with rubber mat
AT-VM95C Dual Moving Magnet phono cartridge with a 0.6 mil conical stylus
Any VM95 Series replacement stylus is Compatible
Straight tonearm with hydraulically lift control and lockable rest
Built-in switchable phono pre-amplifier for phono or line-level output
Medium density fibreboard, with teak simulated wood
AC Adapter that handles AC/DC conversion outside of the chassis reducing noise in the signal chain
Male to Male Dual RCA stereo cable. 45 RPM adapter, rubber mat and removable hinged dust cover.
Type Belt-drive manual turntable
Motor DC servo
Drive Method Belt drive
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Die-cast aluminum
Wow and Flutter < 0.15% WRMS (33 RPM) at 3 kHz
Signal-to-Noise Ratio >60dB
Output Level Pre-amp “PHONO”: 4 mV nominal at 1 kHz, 5 cm/sec
Pre-amp “LINE”: 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain 35 dB nominal, RIAA equalized
Power Supply Requirements 100-240V AC, 50/60 Hz, 0.5 A Max.
Power Consumption 110 V 60 Hz
Working: 1.1 W
Motor off: 1.0 W
Power off: 0.1 W
Dimensions 420.0 mm (16.53") W x 340.0 mm (13.38") D x 116.9 mm (4.6") H
Weight 3.90 kg (8.60 lbs.) without dust cover
Accessories Included Dust cover, Platter, Turntable mat, Drive belt, Counterweight, AT-HS4 headshell, AT-VM95C stereo cartridge, 45-RPM adapter, RCA audio cable (approx.. 1.0 m (3.3’)), AC adapter (approx. 1.5 m (4.9’)) (AD-SA1205WE), Dust cover hinges
Tonearm type: Static balanced straight carbon tonearm
Effective arm length: 223.6 mm
Overhang: 18.6 mm
Tracking error angle: <2 degrees
Applicable cartridge weight: 12-17 g
Stylus pressure adjustment range: 0-3 g
AC adapter: 12 V, 0.5 A
Replacement Stylus: AT-VMN95C
Add products and discover special offers and discounts.