Arcam AVR30 Class G AV Receiver with Arcam PA410 Class AB Power Amplifier
Arcam AVR30 Class G AV Receiver
The AVR30 is a high-performance audio/visual receiver with an impressive 16-channel surround solution and features all the latest CODECs from Dolby, DTS and IMAX Enhanced.
The AVR30 features a dynamic class G amplification for an audiophile listening experience, optimised with full 16-channel Dirac calibration on board as well as mobile streaming using the native app of choice via Apple AirPlay2 or Google Chromecast.
Features
Dolby Atmos & DTS:X 9.1.6 decoding
4K (UHD) HDMI2.0b with HDCP2.2
7 HDMI inputs, 3 HDMI outputs, eARC compatible
Dirac Live® for Arcam room correction
ESS 9026PRO audiophile DAC
Class G power amplification - Uses toroidal transformer
Wifi / Ethernet, RS232 and IR control
Google Cast/UPnP capability for streaming audio
Bluetooth
Free MusicLife iOS UPnP and control app
Continuous power output, per channel, 8Ω/4Ω
2 channels driven, 20Hz - 20kHz, <0.02% THD 120W/200W
2 channels driven, 1kHz, 0.2% THD 140W/220W
7 channels driven, 1kHz, 0.2% THD 100W/180W
Residual noise & hum (A-wtd) <0.15mV
Stereo Line Inputs
Maximum input 4.5V rms
Nominal sensitivity 1V, 2V, 4V (user adjustable)
Input impedance 47kΩ
Signal/noise ratio (A-wtd ref 100W) normal/stereo direct 100dB/110dB
Frequency response 20Hz—20kHz ± 0.2dB
Preamplifier Outputs
Nominal output level 1V RMS (max. 5V RMS)
Output impedance 560Ω
THD+N (20Hz—20kHz) –100dB
Headphone Output
Maximum output level into 32Ω 5Vrms
Output impedance <100Ω
General
Mains voltage 110–120V or 220–240V, 50–60Hz
Power consumption (maximum) 1.5kW (Thermal dissipation approx. 5200 BTU/hour)
Power consumption (idle, typical) 100W (Thermal dissipation approx. 340 BTU/hour)
Power consumption (standby) <0.5W
Dimensions W x D (including speaker terminals) x H (including feet) 433 x 425 x 171mm
Weight (net) 18.1kg
Weight (packed) 21.4kg
Supplied accessories
Mains lead
Remote control with 2 x AAA batteries
Manual
DAB/FM aerial
3 x WiFi/Bluetooth antennas
Calibration microphone
USB cable
The AVR30 is a high-performance audio/visual receiver with an impressive 16-channel surround solution and features all the latest CODECs from Dolby, DTS and IMAX Enhanced.
The AVR30 features a dynamic class G amplification for an audiophile listening experience, optimised with full 16-channel Dirac calibration on board as well as mobile streaming using the native app of choice via Apple AirPlay2 or Google Chromecast.
Features
Dolby Atmos & DTS:X 9.1.6 decoding
4K (UHD) HDMI2.0b with HDCP2.2
7 HDMI inputs, 3 HDMI outputs, eARC compatible
Dirac Live® for Arcam room correction
ESS 9026PRO audiophile DAC
Class G power amplification - Uses toroidal transformer
Wifi / Ethernet, RS232 and IR control
Google Cast/UPnP capability for streaming audio
Bluetooth
Free MusicLife iOS UPnP and control app
Continuous power output, per channel, 8Ω/4Ω
2 channels driven, 20Hz - 20kHz, <0.02% THD 120W/200W
2 channels driven, 1kHz, 0.2% THD 140W/220W
7 channels driven, 1kHz, 0.2% THD 100W/180W
Residual noise & hum (A-wtd) <0.15mV
Stereo Line Inputs
Maximum input 4.5V rms
Nominal sensitivity 1V, 2V, 4V (user adjustable)
Input impedance 47kΩ
Signal/noise ratio (A-wtd ref 100W) normal/stereo direct 100dB/110dB
Frequency response 20Hz—20kHz ± 0.2dB
Preamplifier Outputs
Nominal output level 1V RMS (max. 5V RMS)
Output impedance 560Ω
THD+N (20Hz—20kHz) –100dB
Headphone Output
Maximum output level into 32Ω 5Vrms
Output impedance <100Ω
General
Mains voltage 110–120V or 220–240V, 50–60Hz
Power consumption (maximum) 1.5kW (Thermal dissipation approx. 5200 BTU/hour)
Power consumption (idle, typical) 100W (Thermal dissipation approx. 340 BTU/hour)
Power consumption (standby) <0.5W
Dimensions W x D (including speaker terminals) x H (including feet) 433 x 425 x 171mm
Weight (net) 18.1kg
Weight (packed) 21.4kg
Supplied accessories
Mains lead
Remote control with 2 x AAA batteries
Manual
DAB/FM aerial
3 x WiFi/Bluetooth antennas
Calibration microphone
USB cable
Arcam PA410 Class AB Power Amplifier
With an impressive 70W per channel, the PA410 is a high-performance power amplifier that delivers 4 channels of efficient Class AB amplification.
Featuring the best-in-class components including a toroidal based power supply the PA410 masters the reproduction of music for an unmatched level of sound quality and clarity.
Features
4 Channel Power Amplifier
4 x 70W Class AB amplification (all channels driven)
Toroidal transformer
Ethernet, RS232 control
Continuous power output at 0.2% THD per channel
Four channels driven, 4Ω / 8Ω, 20Hz – 20kHz 70W / 50W
Two channels driven, 4Ω / 8Ω, 20Hz – 20kHz 90W / 60W
Harmonic distortion, 80% power, 8Ω at 1kHz 0.003%
Inputs
Input sensitivity 50W / 8Ω 600mV RMS Signal/Noise ratio (A-wtd) 50W / 8Ω 105dB Input impedance 10kΩ Frequency response 20 - 20kHz +/-0.05dB
General
Mains voltage 110–120V or 220–240V, 50–60Hz
Power consumption (maximum) 700W
Power consumption (idle, typical) 90W (Thermal dissipation approx. 340 BTU/hour)
Power consumption (standby) <0.5W
Dimensions W x H x D (including feet, control knob and speaker terminals) 433x325x105mm
Weight (net) 10kg
Weight (packed) 11.5kg
With an impressive 70W per channel, the PA410 is a high-performance power amplifier that delivers 4 channels of efficient Class AB amplification.
Featuring the best-in-class components including a toroidal based power supply the PA410 masters the reproduction of music for an unmatched level of sound quality and clarity.
Features
4 Channel Power Amplifier
4 x 70W Class AB amplification (all channels driven)
Toroidal transformer
Ethernet, RS232 control
Continuous power output at 0.2% THD per channel
Four channels driven, 4Ω / 8Ω, 20Hz – 20kHz 70W / 50W
Two channels driven, 4Ω / 8Ω, 20Hz – 20kHz 90W / 60W
Harmonic distortion, 80% power, 8Ω at 1kHz 0.003%
Inputs
Input sensitivity 50W / 8Ω 600mV RMS Signal/Noise ratio (A-wtd) 50W / 8Ω 105dB Input impedance 10kΩ Frequency response 20 - 20kHz +/-0.05dB
General
Mains voltage 110–120V or 220–240V, 50–60Hz
Power consumption (maximum) 700W
Power consumption (idle, typical) 90W (Thermal dissipation approx. 340 BTU/hour)
Power consumption (standby) <0.5W
Dimensions W x H x D (including feet, control knob and speaker terminals) 433x325x105mm
Weight (net) 10kg
Weight (packed) 11.5kg
£4399.00Was £5095.00
£3999.00Was £4169.00
£3899.00Was £4069.00
Buying two or more items?
Multibuy List0

Your Multibuy List is empty.
Add products and discover special offers and discounts.